3
2
Instructions for Use
Please read through the instructions carefully for the safe use of the QLOCKTWO LARGE and to ensure
its long useful life and keep them in a safe place. The Instructions for Use are also available online:
www.qlocktwo.com > Information
1. Safety Instructions
1.1 Scope of delivery
Unpack and check scope of delivery; see the mounting template.
Contact your specialised dealer in the event of missing or damaged parts.
1.2 Transport and storage
IMPORTANT Please note the following in order to avoid material damage:
■
Use the original packaging.
■
Avoid knocking, shaking and vibrating during transportation.
■
Two persons must transport the clock. The QLOCKTWO LARGE weighs approx. 25 kg.
■
Store in dry rooms at room temperature and low humidity.
1.3 Place of installation
IMPORTANT Please note the following in order to avoid material damage:
■
Do not use the clock in rooms where humidity is high (e.g. bathrooms).
■
Make sure the clock is placed out of the reach of children and animals.
■
Do not place the clock directly adjacent to or onto hard drives, computers, mobile phones, credit cards or other
electronic components that react sensitively to magnets.
■
Position your QLOCKTWO LARGE so that it cannot fall down in the event of unintentional knocks or pulling of the
cables.
■
Avoid direct heat radiation, for example heat from radiators.
■
Avoid direct sunlight.
1.4 Cleaning
CAUTION Polishing cloths and solvents (e.g. turpentine or benzene), and detergents containing alcohol (e.g. spirit)
may damage the surfaces.
Brushed stainless steel front cover (STAINLESS STEEL):
■
Remove slight stains with the microfibre cloth (included with delivery).
■
Remove stubborn stains with a suitable stainless steel cleaner.
Please read the Instructions for Use carefully before assembling and using your clock in order to exclude
injury to persons and damage to property.
Coated stainless steel front cover (BLACK-, WHITE-, RED-, GREY PEPPER, HAZELNUT):
Remove dirt with a soft cloth and water containing a little dishwasher detergent.
Front cover GOLD, RUST, RAW IRON, VINTAGE COPPER, COPPER:
Carefully dust the surfaces with a soft, dry, dust-free cotton cloth or with a soft, fine brush without applying any
pressure.
1.5 Maintenance and repairs
Never attempt to repair or dismantle your QLOCKTWO LARGE yourself. Have a specialised dealer or the
manufacturer carry out maintenance and repair See the last page of these Instructions for Use for contact details.
1.6 Warranty
The warranty is valid for two years. Only use your QLOCKTWO LARGE with original accessories. Failure to observe
the information in these Instructions for Use or modifying, opening or altering your QLOCKTWO LARGE will not be
covered by our warranty.
1.7 Disposal
IMPORTANT Improper disposal pollutes the environment.
2. Assembly and Connections
2.1 Safe mounting of the clock
Stainless steel: Stainless steel components are to be recycled as scrap metal.
Stainless steel is a valuable raw material which can be melted and reused.
Electric appliances: Electric appliances may not be disposed of as household waste.
Observe regional disposal regulations. Dealers are obliged to take back appliances.
EN
WARNING
Serious to fatal injury caused by electric power
■
Do not pull electric cables; only pull out the plugs.
■
Lay cables so that they cannot be bent or get caught and are not found in passages.
■
Check all cables for visible damage before connecting them to the power supply.
Do not connect your QLOCKTWO LARGE to the power supply in the event of any damage.
■
Have electrical connection carried out by electricians.
■
Cut off the power supply and check to ensure that there is no voltage before commencing with wall
mounting.
■
Comply with acceptable electric data for the power supply, see Section 4 on "Technical Data".
■
Do not touch cables and plugs with wet hands.
Summary of Contents for LARGE
Page 1: ...Enjoy time...
