QLOCKTWO EARTH 90, Instructions For Use

Page: 3 / 5

5 4
The plug of the power supply unit serves as a disconnecting device from the mains supply.
The socket must be located close to the QLOCKTWO EARTH 90 and be easily accessible.
IMPORTANT Please note the following in order to avoid material damage:
■
Observe the load-bearing capacity of the chosen wall and select a suitable fastener for this wall, e.g. dowels and
screws for brickwork.
■
No supply lines may be present near the drill holes.
■
If you feel resistance when hanging your QLOCKTWO EARTH 90 into the wall mounting bracket (e.g. as a result of
unfavourably positioned cables), do not use force to press or turn your QLOCKTWO EARTH 90 into the right position.
The mains plug can be damaged if the QLOCKTWO EARTH 90 does not engage properly in the wall mounting
bracket.
■
Use cotton gloves (included with delivery).
2.2 Wall installation
Power supply from a wall connection:
Wall mounting and electrical connection with a wall connection,
see the mounting template.
Power supply from a power socket:
Wall mounting, see mounting template.
Proceed as follows for an electrical connection using
a power socket:
>
Guide the small plug on the mains cable
(1)
through the cable duct of the wall mounting bracket (2)
and plug it into the power supply.
>
Push the cable relief of the power supply unit into the
cable suspension (3) .
>
Connect the plug of the power supply to the connection
socket of the QLOCKTWO EARTH 90 (4) .
>
Plug the mains plug into a wall socket (5) .
3. Functions and Operation
3.1 Time display and control elements
Time of day shown: 07:18 Control element
3.2 Information on setting a time
The time of day can be transferred easily and accurately to the second to your QLOCKTWO EARTH 90 with many
smartphones by using the free FLASHSETTER app. More information available at: www.qlocktwo.com/flashsetter
QLOCKTWO EARTH 90 can also be set from the front with some instinctive feeling. Touching the [ 1 ] 1-minute step
button will set the internal counter for seconds at zero. This makes is possible to set the time precisely to the second.
Hour display
Set with button [60]
Display in 5-minute steps
Set with button [5]
Each light point
= 1 minute later
Set with button [ 1 ]
[ ] button
Brightness setting
Button [ 1 ]
1-minute steps
Button [ 5 ]
5-minute steps
Button [60]
Hourly steps
EN
(3)
(4)
(5)
(2)
(1)
G F
WARNING
Serious crushing and knocks when dropped
■
The QLOCKTWO EARTH 90 weighs approx. 25 kg. Two persons must have a safe place to stand when the
clock is mounted.
■
Scaffolding or a lifting platform is to be provided, depending on the mounting height.
■
Choose a standing area height so that the persons can safely hold and mount the QLOCKTWO EARTH
90.
■
When inserting the QLOCKTWO EARTH 90 into the wall mounting bracket, make sure that all four
suspension bolts are located in the holders and that the QLOCKTWO EARTH 90 engages in the wall
mounting bracket.
Switching the "IT IS" display on/off:
The factory setting shows the introductory words "IT IS" for full hours and half hours.
>
If "IT IS" is always shown: Keep button [60] pressed for approx. 3 seconds.
>
Restoring the factory setting: Keep button [60] pressed for approx. 3 seconds.