USER'S MANUAL
34
CAUTION
The idle speed should be adjusted with the engine fully warmed up.
Adjustment of the Throttle Cable
1. Loosen the locking nut.
2. Turn the adjuster so that the cable clearance is kept within a range of 0.5 - 1.0 mm.
3. Tighten the locking nut after adjusting of the clearance.
CAUTION
After the adjustment of cable, check the grip to see if it can be turned normally.
The idle speed should not be increased due to this adjustment. The throttle grip
should be able to turn freely.
Adjustment of the Clutch
Before the clutch is released, the cable clearance measured from the lever of
clutch should be 4 mm. If the clearance fails to meet this requirement, make an
adjustment as the following method.
Loosen the locking nut of clutch's cable adjuster.
Turn the adjuster and allow it to the required clearance (4mm).
Tighten the locking nut.
During this time, lubricate the cable with machine oil.
4
6
5
