41
4
B
HANDLING THE REMOTE CONTROLLER
INSERTING AND REPLACING BATTERIES
Put the batteries in the remote control before use.
1. Slide the back cover from the remote control downward, exposing the battery compartment.
2. Insert the batteries, paying attention to match up the (+) and (-) ends of the batteries with the
symbols inside the battery compartment.
3. Slide the battery cover back into place.
G
BATTERY NOTES
For optimum product performance:
• Do not mix old and new batteries, or batteries of different types.
• Do not leave batteries in the remote control , if you don’t plan on using the device for more
than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper disposal of
batteries.
TIPS FOR USING REMOTE CONTROL
•
The remote control must be used within 8 meters of the unit.
•
The unit will beep when remote signal is received.
•
Curtains, other materials and direct sunlight can interfere with the infrared signal receiver.
•
Remove batteries if the remote will not be used more than 2 months.
CAUTIONS FOR USING REMOTE CONTROL
The device could comply with the local national regulations.
•
In Canada, it should comply with CAN ICES-3(B)/NMB-3(B).
•
In USA, this device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
