Qlima S 7035, Operating Manual

Page: 52 / 130

52
4
• The horizontal louver will swing up and down automatically when pressing Swing button. Press again
to make it stop.
• Keep pressing this button more than 2 seconds, the vertical louver swing function is activated. (Model
dependent)
LED DISPLAY:
Press LED button.
Press this button to turn on and turn off the display on the indoor unit.
Press this button more than 5 seconds(some units)
Keep pressing this button more than 5 seconds, the indoor unit will display the actual room
temperature. Press more than 5 seconds again will revert back to display the setting
temperature.
ECO/GEAR function
Press this button to enter the energy efficient mode in a sequence of following:
ECO > GEAR (75%) > GEAR (50%) > Previous setting mode > ECO...
NOTE: This function is only available under COOL mode.
ECO operation:
Under cooling mode, press this button, the remote controller will adjust the temperature automatically
to 24°C/75°F, fan speed of Auto to save energy (only when the set temperature is less than 24°C/75°F). If
the set temperature is above 24°C/75°F, press the ECO button, the fan speed will change to Auto, the set
temperature will remain unchanged.
G
NOTE
Pressing the this button, or modifying the mode or adjusting the set temperature to less
than 24
° C/75 ° F will stop ECO operation. Under ECO operation, the set tmeperature should be
24 ° C/75 ° F or above, it may result in insufficient cooling. If you feel uncomfortable, just press the
ECO button again to stop it.
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption) > 50%(up to 50% electrial energy consumption) > Previous
setting mode.
Under GEAR operation, the display on the remote controller will alternage between electical energy con-
sumption and set temperature.
Intelligent Eye Function
Press this button. Under Intelligent eye mode, with the built-in infrared sensor, the unit
can detect the people’s activities in the room. The wind can flow away from
people, but also can follow people.In Cooling mode ,when you are away for 30
minutes, the unit automatically lowers the frequency to save energy(for inverter
models only). And the unit will automatically resume operation if sensing
human activity again.
man_S70xx ('21) V1.indd 52 man_S70xx ('21) V1.indd 52 08-11-2021 18:08 08-11-2021 18:08