4
76
• Remove the filter as shown in the picture below.
• Clean the filter with tap water and / or a vacuum cleaner to remove any dirty from the
filter.
• Do not use water hotter than 40°C for cleaning and do not expose the filter to the sun.
• Make sure the filter has dried before putting it back in the air conditioner.
2. CLEAN THE AIR-CONDITIONER SURFACE
• First clean the surface with a neutral detergent and wet cloth;
• Then dry the device thoroughly with a dry cloth.
• Do not allow water or deterrent to enter the machine.
• Do not clean the air conditioner with an aggressive cleaning agent and/or petrol.
STORAGE
If you are planning to store the machine without needing to use it for a long time, please
remove the drain cover from the drainage hole at the bottoms both of indoor unit and outdoor
unit, and drain all the condensation water appropriately in available place.
Drain
cover
Drain
cover
Drain
pipe
1.
Remove the unit from the window.
2.
Remove the rubber seal from the indoor unit and outdoor unit, drain the condensate
water.
3.
Keep running in fan mode to make the internal dry.
4.
Turn off the conditioner and pull down the plug.
5.
Wash the filter then install.
6.
Remove all the brackets on the air conditioner, install the brackets of the indoor unit on
the outdoor unit, assemble as shown in the figure below, and then store the unit against
the wall.
7.
Store the air conditioner in a cool and dry place.
8.
We recommend that you put the air conditioner back in its packaging when you store it.
This prevents dirt and dust from collecting on the air conditioner.
Summary of Contents for MS-AC 5002
