CHANGING THE REVERSIBLE DOOR (Noted: FWK 1628A is NOT reversible)
FWK1628 is designed with a reversible door feature (door to open/close
either from the left or the right side). To reverse the opening direction of
your door, please follow these simple instructions.
CAUTION:
•
To avoid personal injury to yourself and/or damage to property and / or the
wine cooler, it is highly recommended that someone assist you during the
door reversal process.
Door Removal
•
Turn off the unit and disconnect the power plug from the wall outlet.
•
Tilt the unit backwards and secure at an angle of 45 degrees.
•
Remove the upper hinge cover (Fig.4: No.6).
•
Remove the screws (Fig.4: No.1) that secure the upper hinge (Fig.4: No.5) to
the frame. Remove the upper hinge (Fig.4: No. 5).
•
Lift the door, remove from lower hinge and place it on a padded surface to
prevent damage and scratches.
•
Remove the screws (Fig.4: No.3) that hold the lower hinge, front leg (Fig.4:
No.2). Remove the lower hinge, front leg (Fig.4: No.2).
•
Remove the front leg (Fig.4: No. 4) and transfer to opposite side.
Door Installation
•
Remove the cover plate (Fig.5: No.7) covering the upper hinge holes.
•
Reverse the direction of lower hinge (Fig.5: No. 2).
•
Install the lower hinge, front leg (Fig.5: No. 2) on the lower frame with screws
(Fig.5: No. 3).
•
Secure door onto lower hinge.
•
Holding the door in the closed position, secure the upper hinge (Fig.5: No. 5)
to the door and screw into the frame (Fig.5: No. 1).
Note: Do not fully tighten the screws (Fig.5: No. 1) until the top of the door is
level with the top of the unit.
•
Install upper hinge cover (Fig.5: No. 6) over the upper hinge.
Fig.4
Fig.5
4
64