50
(Fig. 6)
2.2 Insert the 2P terminal and the 3P terminal into the corresponding terminal
interfaces on the circuit board, and then install the M4x8 screw to secure the
lampshade in place. (See Fig 7)
2.3 Snap the small cover into the hole of the lampshade and tighten it in the
direction indicated by the arrow. (See Fig 8)
(Fig. 7)
(Fig. 8)
Warning: Make sure you tighten the screw to secure the lampshade, otherwise
the lampshade will loosen or drop down when the fan is running.
ATTACH DOWNROD
3.1 Assemble down rod as pictured in Fig.9. (Please select the suitable length of
rod for your ceiling.)
NOTE: If you choose to install a safety Cable/chain onto your ceiling fan, you
will need to run it through the downrod prior to installation.
(Fig. 9)
4
