5. Paste the wall template in position on the wall, ensuring that the reference line is level
using a spirit level.
6. Use a drill to drill the two holes for each bracket, ensuring that all the holes are aligned
with the template.
7. Insert the wall plugs and attach the brackets. See pic. 1.
8. Ensure that the brackets are securely fastened onto the wall, and that there is no risk of
the unit tipping or falling.
9. Carefully attach the appliance to the brackets. See pic. 1.
10. Lock the up-hook with the screw. See pic. 1.
11. Plug in the appliance.
Pic. 1
D. USE
LCD PANEL
Electronic thermostat
–
Instructions
Control panel for electronic thermostat:
①
②
③
④
⑤
⑥
⑦
⑧
⑨
1, Display (shows the desired room temperature by default)
2, Control light - Night function
3, Control button ( ) (increase temperature)
4, Night function
5, Conrol light - day function
6, Power indicator
7, Control button ( ) (reduce temperature)
8, Day function
9, Function button / Open window function
Warning: Before the heater is turned on, it must be attached to a wall or stand. If the heater is not installed
correctly or is installed askew, this may cause the heater to malfunction or in the worst case, be damaged.
If the temperature sensor is not functioning properly, you will see the symbol below on the display. Please contact
the dealer or importer.
1.
LCD-Display
2.
Control light - Night function
3.
Control button up (increase temperature)
4.
Night function
5.
Control light - day function
6.
Power indicator
7.
Control button down (reduce temperature)
8.
Day function
9.
Function button
4
33
