3
•
Bit input mode(using external line) allows you to
select one of five sound options by switching on
one of the 5
channels (Ch1 - Ch5).
• Total of 5 sound options are configurable.
•
Binary input mode(using external line) allows
you to receive multiple inputs by using the 5
channels
(Ch1 - Ch5) to configure one of 30 sound
options.
•
Total of 30 sound options are configurable.
■
Bit Input Mode
■
Binary Input Mode
No. 1
2
3
4
5
0
0
0
0
0
0
1
1
0
0
0
0
2
0
1
0
0
0
3
0
0
1
0
0
4
0
0
0
1
0
5
0
0
0
0
1
0
0
0
0
0
0
1
0
0
0
0
1
2
0
0
0
1
0
29
1
1
1
0
1
30
1
1
1
1
0
Ch 1 Ch 2 Ch 3 Ch 4 Ch 5
COM
Ch1 Ch2 Ch3 Ch4 Ch5
ON(1)
OFF(0)
※
The channel selection method using a
transistor is the same as the external
contact method, please refer to the
figure on
the right.
※
The switch figure to the right explains
how to wire the external contacts of a
signal line product. If the product is not
a signal line product, use the channel
selection switch attached inside the
product.
Binary input mode
Can select up to 30 sound options
Bit input mode
Can select up to 5 sound options
Bit/ Binary Input Method Depending on Wiring Method
• First, machine taps or holes on the mounting surface.
• The mounting hole of this product is 6mm in diameter.
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
•
Install a flat washer and a spring washer to the bolt if the product can experience severe vibration and shock.
Parts Definition/ Installation/ Mounting Hole Specifications
• Machine holes on the mounting surface
referring to the diagram below.
■ Parts Definition/ Installation
■ Mounting Hole Specifications
2-Ø6 HOLES
Min. Ø5 CABLE ENTRY
Min. Ø5 CABLE ENTRY
2
82
2-Ø6 HOLES
5
101
2-Ø6 HOLES
Min. Ø5 CABLE ENTRY
Min. Ø5 CABLE ENTRY
2
82
2-Ø6 HOLES
5
101
QAD100H-N
QAD125H-N
Lens(PC)
Housing(ABS)
LED unit
Sound switch
Sound volume
switch
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP65.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indica-
ted(IP65), it may cause malfunction or damage to the product.
•
For further information, please visit our website (www.qlight.com).
Summary of Contents for S60AD/QAD Series
Page 8: ...MEMO...
Page 9: ...MEMO...
