Qlightec QWH35, Manual

Page: 8 / 12

8
1. Please refer to page 7 ‘ SD Card Specifications and Sound
Saving Manual ’ to see how to save sound files.
- Supports up to 5 user-defined sounds.
2. Insert the SD card into the SD card slot.
3. Set the No. 1 switch of the sound switch to ON to select external
sound.
- For more information, please refer to page 6
‘
Selection between
Built-in Sound and External Sound (SD Card Type) ’
4. Use the Play mode setting switch to select 1, 3, 5, 7 or 8 mode.
- Mode 8 is a test mode which continuously plays channel 1.
(In this case, channel selection is disabled.)
- For more information, refer to page7, ‘ Play Mode Setting’ .
5. To select a channel, use the terminal block in the back side of
the product to select one of the 5 user-defined sounds.
- For more information, please refer to page 5
‘
Bit Input - Use
External Sound (SD Card) ’
- For external signal line type (LC) products, please refer to
page 2 ‘ Bit/ Binary Input Method Depending on Wiring Method ’ .
Model number
Built-in
sound
When playing a built-in sound When playing an external sound (SD Card)
Binary input Bit input Binary input
QWH35
QWH50
31 types of
sounds
Play one of 31 special warning
sounds
Play one of the 5 user-
recorded sounds
-
QWH35SD
QWH50SD
31 types of
sounds
Play one of 31 special warning
sounds
Play one of the 5 user-
recorded sounds
Play one of the 31 user-
recorded sounds
1. QWH35/ QWH50
1. Set the sound setting switch to OFF to select the built-in sound.
- For more information, please refer to page 6
‘ Selecting between
Built-in Sound and External Sound ’ .
2. Select one of 4 modes(2, 4, 6, or 8) by using play mode setting switch.
- Mode 8 is a test mode and the sound of channel 1 is continuously
played. (In this case, channel selection is disabled.)
- For more information, please refer to page7, ‘ Play Mode Setting ’ .
3. Use the channel selection switch to select one of t he 31 built in sound.
- For more information, please refer to page5, ‘ Binary Input - Use
Built-in Sound Source
’.
- For Extracted sound selection signal line type(LC) product,
refer to page2 ‘ Bit/ Binary Input Method According to Wiring
Method
’
for details of channel selection method.
2. QWH35SD/ QWH50SD
1. Please refer to page 7 ‘ SD Card Specifications and Sound
Saving Manual ’ to see how to save sound files.
- Supports up to 5 user-defined sounds.
2. Insert the SD card into the SD card slot.
3. Set the No. 1 switch of the sound setting switch to ON to select
external sound.
4. Use the play mode setting switch to select 1, 3, 5, 7 or 8 mode.
- Mode 8 is a test mode which continuously plays channel 1.
(In this case, channel selection is disabled.)
- For more information, refer to page7 ‘ Play Mode Setting ’.
5. Use the sound select switch to select the one of the 31 user-
defined sounds.
- For more information, please refer to page 6 ‘ Binary Input -
Playing External Sound (SD Card) ’ .
- For external signal line type (LC) products, please refer to
page 2 ‘ Bit/ Binary Input Method Depending on Wiring Method ’ .
- Use ‘Channel Selection Switch’ to select one of the 31 built in
sounds.
-
For more information, see page 5 ‘Sound Selection’ section.
- For LC type product, refer to page2 ‘ Bit/ Binary Input Method
According to Wiring Method ’ section for detailed manual of
channel selection method.
■ When Using a Built-in Sound in Binary Input Mode
※
Sound switch setting → Play mode switch setting
→ Channel selection
■ When Using a Built-in Sound in Binary Input Mode
※
Insert SD card → Sound switch setting → Play mode switch
setting → Channel selection
※
Insert SD card → Sound switch setting → Play mode switch
setting → Channel selection
■ When Using an External Sound Source (SD Card) in Bit
Input Mode
■ When Using an External Sound Source (SD Card) Source in
Binary Input Mode
Operation Method and Setting