Qlightec QWCD35T, Manual

Page: 8 / 12

8
LED(+) (-) AMP(+)
DC INPUT
(10V~30V)
N L
AC INPUT
(100V~240V)
LED(+) (-) AMP(+)
DC INPUT
(10V~30V)
N L
AC INPUT
(100V~240V)
Wiring Instruction for Terminal Block
• SD card specifications
- Use standard SD card.
- Mini SD or Micro SD also can be used
with adaptor.
- SD, SDHC type supported
- Storage capacity : Max. 32GB
- Class : No specification
• Please save the MP3 sound file on the SD card as shown below.
• Create an “MP3_FILE” folder on the SD card and save the MP3
file in the following file format.
• MP3 file format
• When saving files, please save them in order.
- Please start saving after formatting the SD card.
•
The length of the file name must not exceed 40 characters.
23 _ For Elise
.mp3
Filename (Up to 40 characters)
Separator (Track# and file title)
Track# (01-31)
01_Fire.mp3
02_Emergency.mp3
03_For Elise.mp3
31_Cuckoo's Waltz.mp3
[Example]
SD Card Specifications and Sound
Saving Manual
PLAY MODE
1 Bit Input Mode
• Play back one of the 5 built-in or
external sounds once
• For a built-in sound, the playback
time is about 10 seconds
2 Binary Input Mode
• Play back one of the 31 built-in or
external sounds once
• For a built-in sound, the playback
time is about 10 seconds
3 Bit Input Hold
Playback Mode
• Play back one of the 5 built-in or
external sounds continuously
4 Binary Input Hold
Playback Mode
• Play back one of the 31 built-in or
external sounds continuously
5 Bit Input Sound
Reduction Mode
• Decrease the volume of the selected
channel by 15dB
• Play back one of the 5 built-in or
external sounds continuously
6 Binary Input Sound
Reduction Mode
• Decrease the volume of the selected
channel by 15dB
• Play back one of the 31 built-in or
external sounds continuously
7
Bit Input Sequence
Memory Playback
Mode
• When other channel signals are
continuously inputted within 3
seconds after inputting the channel,
the input order is memorized and
playback in the memorized order
(playback time is 3 - 5 seconds)
• The last input channel is played
continuously (Bit input only)
8 Test Mode
• In the test mode, the Ch1 of the
built-in sound or the external sound
is automatically played continuously
• Switch back to another mode to exit
test mode
• Can select between channel input methods (bit/ binary)
and various playback modes.
• Use a (-) flat screwdriver to rotate one space at a time
(regardless of the direction of rotation).
• Switch 0 and 9 have no function.
Play Mode Setting
0 1
2
3
45
6
7
8
9
Play mode switch
Can rotate regardless of
direction
※
setting withdrawal in 3 is SD
•
Please wire up the power line into terminal
①
.
•
Please use ‘O’ type or ‘U’ type wire terminal for safe wiring.
•
AC type : Can be wired regardless of polarity.
•
DC type : Please refer to above figure and carefully follow
the wiring instructions.
■
QWCD35T(Built-in Sound Type)
/
QWCD35TSD(SD Card Type)
QWCD35T-DC type
QWCD50T-DC type
QWCD35T-AC type
QWCD50T-AC type
■
QWCD50T(Built-in Sound Type)
/
QWCD50TSD(SD Card Type)
※
Applicable cable range : AWG18-AWG26