Qlightec QMPS, Manual

Page: 5 / 12

5
RUN
ON
SOUND SET
SD CARD
PLAY MODE
VOL.
MIN. MAX.
ON
1 2 3 4
0
1
2 3 4
5
6
78
9
SOUND SET
ON
1 2 3 4
0
1
2 3 4
5
6
7
89
11
2
+1.0 0.0
112
+1.0
0.0
SOUND
DW
POWER
BUSY
COM
STOP
CH1
CH2
CH3
CH4
CH5
SOUND
DW
STOP CH1 CH2 CH3 CH4 CH5
ON
RUN
SOUND
DW
POWER
BUSY
COM
STOP
CH1
CH2
CH3
CH4
CH5
VOL
PLAY MODE
1 2 3 4
ON
SD CARD
ON
RUN
RUN
ON
SOUND
DW
COM
STOP
CH1
CH2
CH3
CH4
CH5
BUSY
POWER
ON
RUN
PLAY MODE
SD CARD
VOL
ON
1 2 3 4
RUN
ON
SOUND SET
SD CARD
PLAY MODE
VOL.
MIN. MAX.
ON
1 2 3 4
0
1
2 3 4
5
6
78
9
SOUND SET
ON
1 2 3 4
0
1
2 3 4
5
6
7
89
11
2
+1.0 0.0
112
+1.0
0.0
SOUND
DW
POWER
BUSY
COM
STOP
CH1
CH2
CH3
CH4
CH5
SOUND
DW
STOP CH1 CH2 CH3 CH4 CH5
ON
RUN
SOUND
DW
POWER
BUSY
COM
STOP
CH1
CH2
CH3
CH4
CH5
VOL
PLAY
MODE
1 2 3 4
ON
SD CARD
ON
RUN
RUN
ON
SOUND
DW
COM
STOP
CH1
CH2
CH3
CH4
CH5
BUSY
POWER
ON
RUN
PLAY MODE
SD CARD
VOL
ON
1 2 3 4
Rear Terminal Block Configuration
①
Terminal for power input.
②
The auxiliary terminal block outputs power that can operate auxiliary
equipment.
- Input voltage (DC12V) : DC11V output
- Input voltage (DC24V) : DC23V output
- Input voltage (AC) : DC24 ± 10% output
③
COM terminal for channel selection. Refer to Page2 for connection
method information.
④
Sound channel selection terminal. You can select the sound by using
external contact or transistor.
⑤
SOUND DW : When the terminal is connected, playback volume
is reduced by 15dB.
⑥
Stop playback (STOP) : When the terminal is connected during play-
back, playback stops.
Connects power
Provides auxiliary
power output
during operation
Bit/ Binary input method using rear
terminal block
• Bit input mode(using external line) allows you to select one of fiv e
sound options by switching on one of the 5 channels(Ch1 - Ch5).
• Total of 5 sound options are configurable.
■ Wiring through terminal block with either external contact
or NPN transistor allows either bit or binary input method for
sound channel selection.
• Binary input mode(using external line) allows you to receive multiple inputs
by using the 5 channels(Ch1 - Ch5) to configure one of 30 sound options.
• Total of 30 sound options are configurable.
■ Bit Input Mode
■ Binary Input Mode
No. 1 2 3 4 5
0 0 0 0 0 0
1 1 0 0 0 0
2 0 1 0 0 0
3 0 0 1 0 0
4 0 0 0 1 0
5 0 0 0 0 1
※
Please note that the
switches shown on the
table is to explain how
to wire the terminal block.
Actual products do not
have switches attached.
Terminal box
0 0 0 0 0 0
1 0 0 0 0 1
2 0 0 0 1 0
29 1 1 1 0 1
30 1 1 1 1 0
ON(1)
OFF(0)
CH1 CH3 CH2 CH4 CH5
COM
EXTERNAL CONTACT
Binary input mode
Can select up to
30 sound options
Bit input mode
Can select up to
5 sound options
• The volume output of this product is adjustable.
• Turn the volume dial clockwise to increase the volume, and
turn counter clockwise to decrease the volume.
• There will be no sound when the dial is put at MIN.
Volume Dial
Volume Adjustment
VOL.
MIN. MAX.
• SD card specifications
- Use standard SD card.
- Mini SD or Micro SD also can be used
with adaptor.
- SD, SDHC type supported
- Storage capacity : Max. 32GB
- Class : No specification
• Please save the MP3 sound file on the SD card as shown below.
• Create an “MP3_FILE” folder on the SD card and save the MP3
file in the following file format.
• MP3 file format
• When saving files, please save them in order.
- Please start saving after formatting the SD card.
•
The length of the file name must not exceed 20 characters.
23 _ For Elise
.mp3
Filename (Up to 40 characters)
Separator (Track# and file title)
Track# (01-30)
01_Fire.mp3
02_Emergency.mp3
03_For Elise.mp3
30_Cuckoo's Waltz.mp3
[Example]
SD Card Specifications and Sound
Saving Manual