6
Operation Method and Setting
When Using a Built-in Sound Source
Bit input
Binary input
Play one of five sounds from
6 groups
Play one of 30 sounds
■ When using a built-in sound source in bit input mode
1. Please set switch no. 1 to off.
- For more information, see page 4
‘Sound Selection’
section.
2. Use one of the SOUND setting switches 2, 3 and 4 to select one of
the
6 groups.
- For more information, see page 4
‘Sound Selection’
section.
3. Use the terminal block on the back to select one of the five built-in
sounds.
- For more information, please refer to page 4
‘Sound Type and Combi-
nation for Built-in Sound’ - ‘Bit Input’
section.
※
Sound switch setting → Channel selection
■ When using a built-in sound source in binary input
mode
1. Please set switch no. 1 to ON.
- For more information, see page 4
‘Sound’
section.
2. Use the terminal block on the back to select one of the 30 built-in
sounds.
- For details, please refer to page 5
‘Sound Type and Combination for
Built-in Sound’ - ‘Binary input’
section.
※
Sound switch setting → Channel selection
