4
•
First, remove the flange nuts from bolts and place the
product through the mounting surface holes.
•
Fasten the flange nuts on the opposite side of the mounting
surface until the product is tightened securely.
STDL/ STDLF
Cover(ABS)
Lens
(AS)
Long bolt
Rubber spacer
Housing
(ABS)
Cover connector
(ABS)
Resonator(ABS)
Flange nut
3-Ø6 HOLES
Min.Ø5 CABLE ENTRY
PCD70
※
Caution when dealing with lens kit
• Lens kits are connected with connector pins each other. Bad connection
may be experienced when the connector pins are touched with a foreign
substance.
•
If the lens kits are not turned on or not flashed after lens kits replacement,
please make sure status of lens kit connection.
How to Change Lens Kit
Parts Definition/ Installation
• When rearranging or replacing the lens kits, please be aware of the
contact point
①
and the connector pin
②
marked in the diagram on
the left.
• Press down to assemble the lens kits while making sure that connector
pin
②
and connector
③
aligns correctly.
• Please make sure that the rubber spacer placed on the top of each
lens kit is tightly secured to the bottom of the other lens kit.
Mounting Hole Specifications
• Machine holes on the mounting surface refer-
ring to the diagram below.
②
③
①
Summary of Contents for STDL
Page 7: ...MEMO ...
