2
SN-1
SN-1
Ø133
Ø10 CABLE ENTRY
4-Ø5 HOLES
141
5
8
104.5
64
48
72
88
71
• First, machine taps or holes on the mounting surface .
• The mounting hole of this product is 5mm in diameter.
• When machining taps, fasten the bolt through the mounting hole
of the product.
• When machining holes, insert the bolt through the hole of the
product, and tighten the nut from the opposite side of the mounting
surface
• When assembling using bolt and nut, please make sure to use flat
washer and spring washer.
• When adjusting the phase and lower angle of the mixed housing (signalling angle) after product cancellation Loosen the bracket
fixing bolts(
①
) on the side of the product slightly to adjust the desired angle.
■ Adjusting the Angle of the Horn housing
Housing
(Steel)
Bracket(Steel)
①
Housing ring
(Steel)
Dimensions
(Units : mm)
Parts Definition/ Installation
/
Adjusting the Angle of the Horn housing
■
Parts Definition
/
Installation
Wiring Instructions
• External power line -
UL1015 AWG18(0.75sq) x 2C 400m
m
Power
Fuse
White(W)
Black(BK)
DC
