Qlight SEWN30E, Instruction Manual, Page: 3 / 8

3
①
Wiring Instructions for LC Type
• LC type product with exposed sound selection signal line is avali-able uapon request. Please refer to the diagram below for wiring.
• External power line - UL1015 AWG18(0.75sq) x 2C 400mm
• External signal line - UL1007 AWG22(0.3sq) 400mm
• This product can be wired regardless of polarity.
SEWN30E/ SEWN30L/ SEWN30T-DC/AC
Ch1
Ch2
Ch3
Ch4
Ch5
Power
Common
Fuse
External Contact
Ch1
Ch2
Ch3
Ch4
Ch5
Power
Common
Fuse
External Transistor-NPN
Red(R)
Amber(A)
Green(G)
Blue(B)
White(W)
White(W)
or Red(R)
Black(BK)
Black(BK)
Red(R)
Amber(A)
Green(G)
Blue(B)
White(W)
White(W)
or Red(R)
Black(BK)
Black(BK)
SEWN30E SEWN30L SEWN30T
•
First, machine taps or holes on the mounting surface .
• The mounting hole of this product is
9
mm in diameter(hole).
• When machining taps, fasten the bolt through the mounting hole of the product.
•
When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface
• When assembling using bolt and nut, please make sure to use flat washer and spring washer.
■
Parts Definition
/
Installation
• When adjusting the phase and lower angle of the mixed housing (signalling angle) after product cancellation Loosen the bracket
fixing bolts(
①
) on the side of the product slightly to adjust the desired angle.
■ Adjusting the Angle of the Horn housing(SEWN30L only)
Parts Definition/ Installation/ Adjusting the Angle of the Horn housing
Horn housing
Terminal Box(Al)
Housing
(Al)
Terminal Box Wiring Instructions
• Terminal block is located inside of the product. Unscrew the 4 bolts located in the upper
body to get rid of the upper lighting element of the unit(only SEWN50T).
• Please apply fork (U-type) or ring (O-type) locking spade terminal at naked tip of the
wire for secure connection.
• Please wire the Power line to terminal
①
• For AC type products, wire regardless of polarity.
• For DC type products, wire terminal of black line to (-) polarity
①
※
Applicable cable range : AWG16-AWG22