ww w.qlight.com
Lead wire for power supply and product control is connected to
the Connector that is thrown out from power supply wire hole.
Please read carefully this instruction to wire.
▪
Wiring instructions
1)
Interconnect the connecters between Light bar and amplifier.
2) Wire external power supply cable into power source from the
vehicle.
▪
Wire red line ① into positive pole(+).
▪
Wire black line ② into negative pole(-).
※ Caution
When you wiring, make sure the polarity and it may cause
malfunction of the product.
3) Flashing light (AMBER)⑤ is DC power. And if needed, wire and
use it.
Connection wire is not provided.
▪
Mounting bracket for vehicle is provided with product.
Please use mounting bracket so that the product is not isolated
from the vehicle.
▪
If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem on
product operating. Make sure the using voltage does not exceed
+/-5% of the rated voltage.
▪
If lens or body of the product is contaminated by chemicals such
as thinner, benzene, the product can be damaged, discolored or
deformed. Please be careful.
Symptom
Reason
Solution
Amplifier not working
Fuse disconnection
Replace fuse
No power supply
Make sure power supply
Amplifier trouble
Ask to distributor
Sound output failure
Wrong wiring
Recheck wiring
Horn trouble
Ask to distributor
Amplifier trouble
5
Wiring Instructions
6
Mounting Instructions
7
Caution
8
Trouble Shooting
QLIGHT CO., LTD.
http://www.qlight.com
E-mail : [email protected]
Overseas Sales Team / Factory
Tel) +82-55-328-4082 Fax) +82-55-328-3883
185-25 Mukbang-ro Sangdong-Myeon, Gimhae-Si,
Gyeongsangnam-do, Korea
Inquiry for Product and C/S
