2
•
External power line
-
UL1015 AWG18(0.75sq) x 2C 400mm
DC
AC
Parts Definition/ Installation/ Mounting Hole Specifications/ Bulb Replacement Instructions
■ Parts Definition/ Installation
Wiring Instructions
Dimensions
(Units : mm)
■ Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
•
First, remove the flange nuts from bolts and place the
product through the mounting surface holes.
•
Fasten the flange nuts on the opposite side of the
mounting surface until the product is tightened securely.
Reflector
(Heat resistant ABS)
Lens(AS)
Light bulb
Housing(ABS)
Flange nut
Flat washer
Red
Black
White
Black
Power
Power
Fuse
Fuse
PCD 38
3-Ø5 HOLES
Min.Ø5 CABLE ENTRY
S60R
Ø70
70
15
12
1
51
Ø8 CABLE ENTRY
PCD 38
360°/3-M4 BOLT
• Please wait at least
1
minute after turning off the power
before replacing the bulb.
• In order to dissemble the bulb, please push down the bulb(
①
)
lightly and screw it counterclockwise.
• In order to put the bulb in to the unit, please place the bulb(
①
)
in the socket(
②
) and screw it clockwise while lightly pushing
down the bulb.
■ Bulb Replacement Instructions
Assemble
bulb
Disassemble
bulb
①
②