![background image](http://html1.mh-extra.com/html/qlight/qtg-l-wiz-series/qtg-l-wiz-series_user-manual_3212108063.webp)
56
Wireless Network System User Manual
No.
Item
Description
4
Duty cycle
It is the interval (time) at which the status of a wireless signal information d
evice is checked. When it is set to 5, it is checked every 5 seconds.
Time indicates how long it takes to check one wireless signal information d
evice.
The recommended time is 2 to 3 seconds.
5
Scan method
ALL: the PC checks the status of all the wireless signal information
devices one by one.
GROUP: the PC checks the status of all the wireless signal information
devices by group.
For a swift status check, GROUP is recommended.
③
: It is a wireless setting used when sending the packets of a wireless signal information device to
the gateways or the USB dongle.
No.
Item
Description
1
TTL
It is the number of hopping through a wireless signal information device
when the packets are sent from the wireless signal information device to
Gateway or the US dongle.
The recommended count is 5 to 6.
2
Reply count
It is the number of times the statue of a wireless signal information device i
s checked. When it is sent to 3, a status check is conducted three times. If
no response is given for three attempts, it is regarded as a communication
failure. If there is at least one response, it is displayed as 'in communicatio
n mode'.
An operation count of 2 to 3 is recommended.
Summary of Contents for QTG L-WIZ Series
Page 18: ...19 Wireless Network System User Manual 2 Ordering Specification 3 Technical Diagram ...
Page 25: ...19 Wireless Network System User Manual 3 Technical Diagram ...
Page 28: ...29 Wireless Network System User Manual 3 Wiring Instructions ...
Page 29: ...30 Wireless Network System User Manual ...