Lens(PC)
Long bolt
Housing(Al)
Bolt
Buzzer hole
Bracket(Al)
Spring washer
Flat washer
Flange nut
3
• Please disassemble the M5 bolts placed in mounting bolts and
place the bracket on to desired mounting surface.
• Tighten the flange nuts from the opposite side of the mounting
surface.
4-Ø5.5 HOLES
Ø17 HOLES
PCD 56-59
Installation Environment and Protection Rating
• This product is designed for indoor use with protection rating of IP44(standard type) or IP23(buzzer type).
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP44), it may cause malfunction or damage to the product.
• For further information, please visit our website (http://www.qlight.com).
Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
Parts Definition / Installation
Product Operation Inquiry / Customer S82-55-328-4082
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : A-412, 579 Kyungin-Ro, Guro-Gu, Seoul, Korea (Postal Code : 08212)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805)
www.qlight.com
EN-1808A
