5
①
Terminal for power input.
②
COM terminal for channel selection. Refer to Page2 for connection
method information.
③
Sound channel selection terminal. You can select the sound by using
external contact or transistor.
No.
④
,
⑤
, and
⑥
options are not be used.
Rear Terminal Block Configuration
Connects power
Bit/ Binary input method using rear
terminal block
•
Bit input mode(using external line) allows you to select one of fiv
e
sound options by switching on one of the 5 channels(Ch1 - Ch5).
• Total of 5 sound options are configurable.
■
Wiring through terminal block with either external contact
or NPN transistor allows either bit or binary input method for
sound channel selection.
•
Binary input mode(using external line) allows you to receive multiple inputs
by using the 5 channels(Ch1 - Ch5) to configure one of 30 sound options.
•
Total of 30 sound options are configurable.
■ Bit Input Mode
■ Binary Input Mode
No. 1 2 3 4 5
0
0 0 0 0 0
1
1 0 0 0 0
2
0 1 0 0 0
3
0 0 1 0 0
4
0 0 0 1 0
5
0 0 0 0 1
※
Please note that the
switches shown on the
table is to explain how
to wire the terminal block.
Actual products do not
have switches attached.
Terminal box
0
0 0 0 0 0
1
0 0 0 0 1
2
0 0 0 1 0
29
1 1 1 0 1
30
1 1 1 1 0
ON(1)
OFF(0)
CH1
CH3
CH2
CH4 CH5
COM
EXTERNAL CONTACT
Binary input mode
Can select up to
30 sound options
Bit input mode
Can select up to
5 sound options
%*
%*
%*
%*
%*
5612
5170&
&9