2
3
Bracket(Al)
FLEXIBLE TUBE
(STEEL)
Housing(Al)
Cover(Al)
Parts Definition/ Bracket Adjustment
■ Parts Definition
■ The method of adjusting an angle
• This product is installed a corrugated tube type bracket and it is
possible to conveniently adjust the irradiation angle on the product
light source without a tool.
Installation/ Mounting Hole Specifications
•
First, machine taps or holes on the mounting surface (
①
).
•
The mounting hole of this product is 4.2mm in diameter.
•
When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and
tighten the nut from the opposite side of the mounting surface.
■ Installation
• Machine holes on the mounting surface referring to the diagram below.
■ Mounting Hole Specifications
4-Ø6 HOLES
PCD72
①
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP65.
• If the product is installed in locations with excessive dust or water other than the designated IP protection rating indicated(IP65),
it may cause malfunction or damage to the product.
• For further information, please visit our website(www.qlight.com).
