3
Parts Definition and Installation
Mounting Hole Specifications
• First, remove the flange nuts from bolts and place
the product through the mounting surface holes.
• Fasten the flange nuts on the opposite side of the
mounting surface until the product is tightened
securely.
Lens(PC)
LED unit
Housing(ABS)
Flange nut
• Machine holes on the mounting surface referring to the diagram
below.
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP65.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP65), it may cause malfunction or damage to the product.
• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-down
positions where water can potentially penetrate into the product and impact it’s operation.
• For further information, please visit our website (http://www.qlight.com).
QMCL60
QMCL80
QMCL100
QMCL125
3-Ø5 HOLES
Ø9 HOLES
PCD 60
3-Ø6 HOLES
Ø9 HOLES
PCD 85
3-Ø5 HOLES
Ø9 HOLES
PCD 38
3-Ø5 HOLES
Ø9 HOLES
PCD 50
All manuals and user guides at all-guides.com
