Qleen PURASTART, User Information

Page: 7 / 10

7
2.16 Defect systems - Safety Remarks
Defect systems must be immediately
• Decommissioned
• Disassembled
• Removed
• Repaired
2.17 Repair works
Repair works must be exclusively carried out by authorized QLEEN dealers. For any
repair works, please, contact the technical customer service of your authorized
QLEEN dealer where you bought the system.
2.18 Recycling, Disposal (System, Accessories, Packaging,
Mix-bed resin)
We kindly ask you to consider the information of the „User information Cleaning,
Maintenance, Repair, Storage, Disposal“ (separate publication of the Lehmann KG).
2.19 Product data
2.20 Supply connections
• Water supply to the system via the water pipe,
• Flexible single hose (25 m) for supplying the cleaning head with water, pure
water or cleaning solution
• Water supply: Gardena Coupling
2.21 Environmental and Climate Conditions
• Permissible temperature range for system use: +5 °C to +50°C
• Maximum permissible wind speed: < 3,4 m/sec (wind speed 2) for works with
the pole set
• Maximum permissible surface temperature of surfaces to be cleaned: < 50 °C
Component Measured parameter Remarks Values
Device
Dimensions Length / Width / Height 38 x 38 x 110 cm
Weight With filled bottle 38 kg
Water supply
Pressure min. / max. 0 / 5 bar
Temperature min. / max. 5° / 50°C
Granulate
Needed amount per filling 25 l
Productivity Depends on the water supply quality 1.150-11.500 l pure water
Pole set
Work height max. 15 m
Work place
Work and movement area Length / Width, minimum 2 x 2 m
Ground bearing capacity min. / max. 250 kg/m 2
Safety distance from power pylon/lines mind. 40 m