Qleen PURASTART E, User Information, Page: 13 / 28

| 13
3. To connect the LEWI telescopic rods to the joint, remove the QLEEN - LEWI adapter from the joint and
insert the telescopic rod directly into the joint
2. Put the joint with the window washing brush on the telescopic CARBONPOLE
4.6 Connection of the telescopic pole and brush*
2. Switch on the battery with the »Power« key,
the key lights up green green
⇒ The machine is switched on
Starting up
180 Grad
1. Loosen the wing screw on the joint and set the desired working angle and tighten the wing screw again
• If the battery indicator shows yellow yellow the battery should be
charged
• If the battery indicator shows red red , the battery must be
charged immediately
⇒ See page 19 (8.2 Charging the battery)