background image

Website: www.keennew.com

Qixiang Technology, Contact Us for purchasing

Email: [email protected]

Whatsapp: +86 13249165907

4

The router can be placed on a desktop or mounted to a DIN rail.

DIN rail mounting

Use 3 pieces of screws to fix the DIN rail to the router, and then hand the
DIN rail on the mounting bracket. It is necessary to choose a standard
bracket mount the router with the wall mounting kit on the wall.

4. Connect the Router to a Computer

Connect an Ethernet cable to the LAN port of the router, and connect the
other end of the cable to your computer.

5. Power Supply

The power interface is in the 7 Pin terminal block on the top panel. Connect
the power adapter with the convert cable with Pin terminal block.

Note:

The range of power voltage is 7.5V-32V DC

PC Configuration

There are two methods to get IP address for the PC. One is to obtain an IP address automatically from “

Local Area Connection

”, and another is to configure

a static IP address manually within the same subnet of the router. Please refer to the steps below.
Here take

Windows 10

as example, and the configuration for windows system is similar.

Summary of Contents for QX310












Reviews: