English
2
Using the Lamp
Maintenance and Troubleshooting
Cleaning the Lamp
Turn off the lamp first, and unplug the lamp from the power outlet. Use a soft and dry cloth to
wipe any smears or dusts off the lamp's outer casing. Do not use any chemical solvents like
kerosene, naphtha and so on, as the lamp's casing may become damaged.
Cleaning the Wiring
• Use only a dry and soft cloth to wipe the lamp's wiring clean. Never use a wet cloth, as it
may cause an electric shock.
• Do not rinse the lamp or any of its components directly with water.
Troubleshooting
If you encounter problems when using the lamp, check the following:
• Are there loose connections between the power socket and the mains power outlet?
• Is the power switch correctly flipped to the ON position (the side with the "-" mark)?
If the problem persists, please contact your nearest authorized service center for help.
Specifications
www.QisDesign.com
When the power is off, flip the power switch to the ON position
(the side with the "-" mark) to turn on the lamp.
When the power is on, flip the power switch to the OFF position
(the side without the "-" mark) to turn off the lamp.
Model
CR01 _D
CR01 _DR45
CR01 _DR55
DC power input
15V, 1.2A
Power consumption
5W
7W
10W
Operating temperature
0 C - 40 C
Dimensions (the lamp only,
diameter x height)
212 x 360 mm
212 x 450 mm
212 x 550 mm
Coral_D_DR45_DR55_4J.0TG02.002.book Page 2 Tuesday, September 21, 2010 2:54 PM
