M4-11-0002-100 - 6 - Version: 1.0 – 2007/12/03
M26 Evaluation Board User Guide
D.
MIC1 (4): Plug in the Electret Condenser Microphones (ECM) if you
want to verify the hand-free audio path
E.
Speaker (5): Plug the Speaker if you want to verify the hand-free audio
path
F.
RS232 (6): connect the RS-232 cable between M26 EVB and the PC for
AT-command
G.
USB (7): connect the USB cable between M26 EVB and the PC for
code down or other applications.
H.
Make sure antenna is secured to RF connector (8)
(2)
Switch on the EVB board power supply
(3)
Check LED1 (9) (Power On indicator)
(4)
Press the power-on button S1 (10) to turn on Qisda M26 module
(5)
Open a HyperTerminal RS232 COM port connection
I.
Configure the COM port with Baud rate 115200, No parity and 1
stop bit and none flow control
