Qimova PE-L, User Manual, Page: 41 / 48

Qimova chair | User manual
Version 1.10 | Page 41 af 48
9.3 Packing for shipment or storage
Please follow the instructions below prior to shipment or storage of the wheelchair.
Packing the chair
When preparing the power chair
for shipment or storage, dismantle
the battery cable with large fuse
between batteries.
Figure 41.
Then follow these packing
procedures:
Unplug the securement pin (1) at
arm on the backrest and dismantle
pushing handle (2) as well.
Remove leg rests (3) and armrest
(4) to reduce space.
Incline the backrest and place leg
rests as shown.
Figure 39.
Figure 39
10 Cleaning and maintenance
NOTE:
Do not clean the wheelchair with a high-pressure cleaner as this can cause short circuiting.
10.1 Protective /incontinence cover
It is recommended that protective covers are used on the seat and armrests. Protective-
and incontinence covers are tailored to fit the seat cushion. They are fixed to the seat by
stretching the fabric a little to get the cover in the right position over the cushion. On some
seat cushions there are Velcro strips on the sides of the seat cushion and on the inside of
the covers, but generally these are not necessary to hold the cover in the correct position.
10.2 Washing instructions for upholstery
10.2.1 Upholstery
Washing and ironing the upholstery is not possible as it damages the inflammable coating.
For cleaning of dry stains just brush with a smooth brush, for fluid staining, absorb the
staining with an absorptive cloth and avoid contact with any liquids.
Using any liquids on the upholstery can ruin the inflammable coating of the fabric.