Quick start guide
1. Install SD card:
Insert the Micro SD card you prepare into the slot as indicated, as shown on the
right.
Important:
A high-speed Micro SD card between Class 6~Class 10 is a must; or else, this
product may not work normally.
Always turn off the camera before inserting or pulling out of the card.
2. Power-on/off
Power-on
: Press and hold Power button for about 2 seconds and release, until it
beeps. The display screen will be lighted, as shown below, indicating the product is
ready to work (the default work mode after power-on is Shooting mode).
Important:
If power-on fails, charge the camera first, and see whether the blue
indicator lights up during charging. If yes, it indicates the product is being
charged.
Power-off
: After shooting stops, press and hold Power button for about 3 seconds
and release. The Display will display “GOODBYE” and turns off. No operation on
mainframe for 3 minutes under Power-save mode (default), the camera will
automatically power off.
