8
UM Assembly Palletiser HR7 (partly completed) QS203263 v1.0
EN
Introduction
1.4 Machine identification / CE marking
The machine is referred to as the ‘Palletiser HR9’. The year of construction of the machine is
2019. The machine identification plate is mounted on the machine according to figure 1-1.
Manufacturing year
: 2021
Type
: Assembly Palletiser HR9
Serial number
: QS21XXXX
Assembly …
Order number
: QS21XXXX
Power supply
: 3x400 V - 50 Hz NPE
Nominal power
: 23
kW
Weight
: 4350
kg
Maximum load
: 25 / 180 / 1000
kg
Nominal capacity
: 1300
p/hour
Figure 1-1: Machine identification plate of the partly completed Palletiser HR9
Because the machine is delivered without a control system, it is a ‘partly completed machine’
and does not have a CE marking. This means that this machine does not fully meet the essen-
tial health and safety requirements of the European Union. The requirements that
are
met are
stated in the enclosed Declaration of Incorporation for partly completed machinery. It is forbid-
den to put the machine into operation before all the requirements have been met and a CE
mark has been affixed to the machine.