Qilive Q.6899, User Manual

Page: 10 / 68

10
EN
not slip during the door reversing process. All parts removed must be saved to do the
reinstallation of the door. Do not lay the appliance flat as this may damage the coolant
system. It is better that 2 people handle the appliance during assembly.
1. Remove the upper hinge cover, then remove the upper hinge after removing its three
screws (

Fig. 3).
Upper hinge cover
3 screws
Upper hinge
Fig. 3
Upper door
Center hinge
2 screws
Fig. 4
2. Remove the upper door.
3. Remove the center hinge after removing its two screws (

Fig. 4).
4. Remove the lower door.
5. Remove the lower hinge after removing four screws (

Fig. 5).
6. On the lower hinge, remove the hinge screw, and remove the hinge pin after removing
its washer and nut (

Fig. 6).
Lower hinge
4 screws
Fig. 5
Hinge pin
Hinge screw
Washer
Nut
Fig. 6
On the lower hinge again, re-fix the hinge screw on its opposite side, and re-fix the
hinge pin with the washer and nut on its opposite side (

Fig. 7) .
Hinge pin
Hinge screw
Washer
Nut
Fig. 7
Door stop
Lower door
Fig. 8
7. Install the lower hinge on the left side of the cabinet.
8. On the lower door, remove the door stop after loosening its screw on the bottom right,
then re-fix the door stop on the bottom left using the screw (

Fig. 8).
9. Install the lower door onto the lower hinge.