10
EN
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to
Commission Regulation (EU) 2019/2023 (1) is found:
(b) for the eco 40-60 programme.
(c) changes to these items shall not be considered relevant for the purposes of
paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
(d) if the product database automatically generates the definitive content of this cell,
the supplier shall not enter these data.
3. INSTALLATION
3.1. INSTALLATION AREA
Warning!
■
Stability is important to prevent the product from
wandering! Make sure the machine is standing leveled and
stable.
■
Make sure that the product does not stand onto the power
cord.
■
Make sure to maintain the minimum distances from the
walls as shown in the picture.
Before installing the machine, follow the steps below to select a
suitable location:
1.
Rigid, dry, and level surface
2.
Avoid direct sunlight
3.
Sufficient ventilation
4.
Room temperature is above 0°C
5.
Keep far away from the heat sources such as coal or gas
burning appliances.
3.2. UNPACKING THE WASHING MACHINE
Warning!
■
Packaging material (e.g. film, polystyrene foam) can be
dangerous for children.
■
Risk of suffocation! Keep all packaging materials out of the
reach of children.
1.
Remove the cardboard box and polystyrene foam.
2.
Lift the washing machine and remove the base packing.
Make sure the small triangle foam is removed with the
bottom piece together. If not, lay the unit down on its side,
and then remove the small piece of foam from the bottom
of the unit.
3.
Remove the tape securing the power supply cord and drain
hose.
4.
Remove the inlet hose from the drum.
