Qilive Q.5328, User Manual

Page: 11 / 98

11
EN
3. Remove the filter from the filter protection by turning it anti-clockwise and lifting it upwards.
Clean the filter with a dry cloth or a soft brush. Run cold water over the outside of the filter and
filter protection until the water runs clear, if necessary. Wash the filter regularly or as required.
Lay the filter, and filter protection on its side to dry completely.
4. When completely dry, reinstall the filter protection into the duct container first. Put it in the filter
protection and lock it into place by turning it clockwise. Make sure it is fitted properly. Then, fit
the filter into the filter protection.
5. Reattach the dust cup in the main body.
6.3 Maintaining the floor nozzle
Note: If you run over a hard or sharp object or notice a noise
change while vacuuming, check for blockages or objects caught
in the roller brush.
1. To remove the roller brush from the floor nozzle, slide the
locking plate to the right. Gently pull the roller brush out from
the side.
2. Clean the roller brush and remove any stubborn dirt. Cut any
threads or hairs that have wound themselves around the roller
brush with a pair of scissors. Wipe the roller brush compartment with a soft, damp cloth. Let it
dry completely.
3. Replace the roller brush into its compartment until it locks securely in place. Slide the locking
plate to the left.
6.4 Maintaining the motorised pet tool
Note: If you run over a hard or sharp object or notice a noise change while vacuuming, check for
blockages or objects caught in the roller brush.
1. To remove the roller brush from the motorised pet tool, slide the locking plate from to .
Gently pull the roller brush out from the side.
2. Clean the roller brush and remove any stubborn dirt. Cut any threads or hairs that have wound
themselves around the roller brush with a pair of scissors. Wipe the roller brush compartment
with a soft, damp cloth. Let it dry completely.
3. Replace the roller brush into its compartment until it locks securely in place. Slide the locking
plate from to .