Charging
Cleaning
▲ Ensure the charging port is dry.
▲ Plug the power adapter into the DC power port of the kick scooter and a standard
power outlet. Make sure the red indicator on the adaptor lights up.
▲ When the red indicator lights on, the charger indicates charging properly, otherwise
check if the line is connect properly.
▲ When the red indicator light on, the charger changes from red to green, this indicates
that the battery is fully charged.
▲ In this case, please stop charging. Over charging will affect the battery life.
▲ The charging time is approximately 3-5 hours, over charging will negatively affect
battery's life.
▲ Please keep the charging environment clean and dry.
▲ When the charging port is wet, don't charge the kick scooter's battery.
WARNING:
When you are flushing or moping the scooter, make sure the scooter is
switched off and not connected with the charging cable and the charging port is covered
with rubber cap, otherwise serious damage will be caused to the scooter with water
getting inside the machine.
Keep the scooter in a dry and cool place and avoid long time outdoor storage when the
scooter is not used. Long time exposure to outdoor sun, excessive heat, and excessive
cold will speed up the aging of the scooter outer case and reduce the lifespan of the battery.
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents
as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based
cleaners as they may damage or dissolve the plastic components or soften the decals or
decal adhesive.
WARNING:
non-professionals are not allowed to open the battery.
12