QHY90A
4
02
Software Installation
Note that when you run its driver setup program, you will be prompted to install camera driver,
network card driver, and FTDI Serial port driver.
for the built-in filter wheel
.
5. QHY90A camera uses EZCAP_QT as the default capture software. Please download and
install
6. Connect QHY90A to your PC with USB2.0 cable. Connect your QHY90A to 12V power supply.
Make
sure 12V power supply is always connected when you use QHY90A.
It is also highly recommended
that to use the 12V extension cable because it has self-locking function. Note that there are two power ports
on QHY90A, and these two ports are connected in parallel, so you can either one of these two as power
input port and use the other one as a power output port for other devices that need 12V power supply. Turn
the switch on. For the first time the system will find a new device and search the driver. You can keep
skipping the online searching by clicking "Skip obtaining driver software from Windows Update" and the
computer will find the drivers. After installation is complete successfully, you can find the device in the device
manager as shown in the picture below.
7. QHYCCD has developed a software named
that can check if the drivers installed on your
computer are the latest versions as well as update the drivers if needed. If the status of some
driver is “Need
Update”, you can directly download its update package in this software freeing you from the inconvenience
of looking for and downloading it from our website.
Take QHY367C for example, you can see the drivers we need are the latest versions
and don’t need to be
updated as shown in the following picture.
Note that after you downloading and installing the new drivers by using this software, be sure to pull the
