QHYCCD QHY16803A, Manual, Page: 7 / 41

QHY16803A
03 Use QHY16803A in EZCAP_QT
EZCAP_QT is the software developed by QHYCCD. This software has the basic capture function
for QHYCCD deep sky cameras. You can use this QHY16803A camera with its built-in filter wheel
in this software.
1. Install
EZCAP_QT
2. Connect your QHY16803A to 12V power supply. Connect your QHY16803A to your computer
with USB2.0 cable.
3. Run EZCAP_QT. Select "Connect" in Menu->Camera. If the camera is successfully connected.
The title of EZCAP_QT will display the camera firmware version and the camera ID as shown
below.
Before you click "connect", you have to make sure you can see QHY16803A in the device
manager on Windows. Sometimes if you click "connect", you may see the warning shown in the
picture below.