PBX-808TWS
-5-
Instruction
:
1. Take out the main column from the tripod and assemble them with sleeve;
2. Put nuts inside the cases, and then insert one of the nut cases into the sleeve slot;
then fastened by screw;
3. Insert another nut cases into the tripod slot, and fastened by screw as well;
4. Insert the lock pin in the hole of main column to control the height.
Lock Pin
screws
nut cases
Main
Column
Sleeve
Tripod
Tripod
Screw
Lock Pin
Main
Column
Sleeve
Nut Case
Nut Case
Screw
Put nut in
the nut case
Insert the nut case
into the sleeve slot
Insert the nut case
into the tripod slot
Put the lock pin in the
hole of main column
Fasten by screw
Fasten by screw
