QFX PBX-1008, User Manual, Page: 7 / 14

-6-
PBX-1008 BATTERY
PBX-1008
1. The PBX-1008 is a battery powered PA loudspeaker. Be sure that you have completely
charged the battery prior to first use to maximize the battery's lifespan.
The PBX-1008 takes approximately 8 hours to fully charge. The PBX-1008 will automatically
begin charging once the power cord is connected to a power source and Power Switch is set to ON.
The unit will also power on when connected to a power source even if the battery power is low.
When connected to a power source the PBX-1008 will play while also charging the battery.
When the battery is full, the charging indicator light on the front panel will OFF.
2. Upon completion of the charging, Please disconnect the power cable.
3. If the unit's Low Battery indicator is illuminating red, please power off the unit and begin
charging the battery.
4. With standard usage, a fully charged battery can play for about 4-5 hours.
5. Battery can be recharged about 300 times in its life time.
6. When not in use, the speaker should always be set fo OFF to prevent the unit from draining the
battery.
7. When the unit is not used for prolonged periods of time, the battery will gradually lose its power.
It is recommended to fully charge the battery at least every 60 days.