22
Press buttons REC/SETUP and UNITS again together to quit this
function.
MEMORY
Press button REC/SETUP to save the current reading. Display indica-
tion in the upper right corner: MEM + no. of memory location assigned.
Press button LOAD for approx. 5 sec. to load the readings saved.
Display indication in the upper right corner: MEM + memory location.
Now you can browse in the data saved with buttons MAX/MIN (up)
and HOLD (down). Press button LOAD again for approx. 5 sec. to
quit this function. (The instrument has an internal memory for 99
measurements).
DATALOGGING
First set sampling rate (see page 21); standard sampling rate is 1 sec.
Press button REC/SETUP for approx. 5 sec. to activate datalogging
function. Display indication in the upper right corner: MEM flashing.
Press button REC/SETUP to save the current reading. Display indica--
tion in the upper right corner: MEM + no. of memory location assigned.
Press button REC/SETUP again for approx. 5 sec. to quit this function.
If memory is full display will show „OL“. Press buttons REC/SETUP
and LOAD at the same time to cancel all 99 measurements saved.
Display indication in the upper right corner: MEM CL:
If measurement is completed cover probe with lens cover and switch
off instrument.
All manuals and user guides at all-guides.com
