6
%R H
¡ ãF
¡ ãC
5
o
when the battery voltage drops below the
operating level.
Operating Conditions:
32 to 122
o
F (0 to
50
o
C); < 80% RH non-condensing
Storage Conditions: 14 to 140
o
F (-10 to 60
o
C);
<80% RH non-condensing
Auto Power Off: Meter automatically shuts down
after approx .15 minutes of inactivity.
Power: One standard 9V, NEDA1604 or 6F22
battery.
Dimensions/Wt.:
225 (H) x 45 (W) x 34 (D) mm/200g
Humidity/Temperature
Measurement
Range:
Humidity: 0%~100.0%RH
Temperature: –20.0
倍
- +60.0
倍
-4.0
狽
- +140.0
狽
,
Resolution : 0.1% RH, 0.1
倍
/
狽
.
Humidity Accuracy:
+ 3.5%RH (at 25
倍
, 5%
譌
95% RH ).
Note: The measuring range is from 0% to
100%, but above 95% and below 5% the
deviation is not specified.
Air Temperature Accuracy:
+ 2.5
倍
; +3.5
狽
.
4. PANEL DESCRIPTION
率
率
率
率
Humidity / Air Temperature Probe
(Humidity
Sensor
and
Semiconductor
Sensor inside)
立
立
立
立
LCD display: 3 1/2 digits LCD display
with units of oC,
狽
, %RH and low battery
“BAT” MIN /MAX HOLD, DATA HOLD
indication.
葎
葎
葎
葎
MAX/ MIN Recording/Data Hold Button:
MAX/MIN: Press MAX/MIN/Hold to
enter MAX, MIN Recording mode
(manual range only ). Select the
proper range before selecting MAX
MIN to ensure that the MAX/MIN
reading will not exceed the testing
range. Press once to select MIN.
Press again to select MAX. and press
again release MIN/MAX recording
function.
Data Hold:
Press and hold the Button
for over 2 second to turn on or off data
hold function.
The reading will be held
when Data Hold button Switch is
pressed. If the button Switch
for over 2
second
is pressed once again, will
release the hold and allow a further
measurement.
MAX Hold / MIN Hold:
Press and hold
the Button for over 2 second to turn on
or off data hold function.
掠
掠
掠
掠
%RH ,
倍
倍
倍
倍
,
狽
狽
狽
狽
select Button:
Press %RH ,
倍
倍
倍
倍
,
狽
狽
狽
狽
select Button to
enter select %RH ,
倍
,
狽
Measurement
略
略
略
略
!
!!
!
Power ON/OFF Button :