background image

Quality in Electronic Manufacturing

Pag. 5 di 27

HB 237.16

Instrument

release

Manual

release

0

0

New manual

01 / 03 / 97

Modifications to manual

Date of

modifications

1 - 3 RESPONSIBILITY AND VALIDITY

RESPONSIBILITY

QEM declines all responsibility for any injury to persons or damage to things resulting from the failure to observe the

instructions and rules in this manual and the "Installation, maintenance and servicing manual". It is furthermore

specified that the customer/purchaser is bound to use the instrument according to the instructions provided by QEM

and, if any doubts arise, to send a written query to QEM. Any authorisation for exceptions or substitutions, if contested,

will be deemed valid by QEM only if written consent has been given by QEM.

The reproduction or transfer of all or part of this manual to third parties is forbidden without QEM's written consent.

Any transgression will result in a claim for compensation for the damages sustained.

All rights deriving from patent or designs are reserved.

QEM reserves the right to make partial or complete modifications to the characteristics of the instrument described

and the corresponding documentation.

Objective

The objective of this manual is to give the general rules for the use of the instrument described.

Recommendation

Write down all the instrument setting and programming parameters, keeping them in a safe place to facilitate any future

replacement or servicing operations.

VALIDITY

This manual is applicable to all instruments designed, manufactured and tested by QEM with the same order code.

This document is valid in its entirety, save errors or omissions.

Summary of Contents for HB 237.16





























Reviews: