The cables are secured
using cable reliefs as
shown in
figure 8
. When
using
loop-back
wiring,
both cables are secured by
the same cable relief.
When using
pass-through
wiring, the plastic tab
shown in
figure 9
must be
broken off the back cover.
A short press on the device
will toggle the controlled
appliance - only when the
device is completely initial-
ized. Refer to the online
manual for additional
information.
Remount back cover. The
device is now ready for
use. Connect it to power
and to a plugged-in load
and it will light blue as it
attempts to join a Z-Wave
network.
IN
OUT
10
11
8
9
