![background image](http://html1.mh-extra.com/html/qeedji/slate-series/slate-series_user-manual_3136891018.webp)
1.6.1.2
Secondary picture display
The secondary image is a feature which allowing to display an alternative .ppk image stored on the SLATE106 device.
This feature is not active by default and need to be activated in the
APPLI.CFG
configuration file. Execute from the USB mass storage the application
APPLI.HTA
.
Activate the support for
Wake-up by vibration sensor
Activate the support for
Touch keys
Check that the action
Display a key image instead of standard one, during
seconds
for the wake-up source
After key
.
Duration
Adjust the duration if required (default: 60 seconds). The maximal duration for the secondary picture is 18 hours.
Configuration example
☛
In that use case, it is considered that SLATE106 device is not paired to a SMH300 hub. So, for optimization reasons, all what is action linked to WPAN1 has been
inactivated in the matrix
☛
In that use case, it is considered that the support of the feature
Slate Message Overlay
is not required for SLATE106 device and has been inactivated. So, for
optimization reasons, all what is action linked to WPAN2 has be inactivated in the matrix
Each time a key configuration file is pressed, the keycode sent is taken in the list in the defined order and the associated secondary .ppk picture is displayed. At the end
of the list, it comes back to the first keycode of the list.
The SLATE106 device supports until 3
Touch keys
and is depending on the PSN value.
SLATE106 device PSN value
Number of supported key
Key supported
PSN00900-XXXXX
2
Left, Right
PSN00901-XXXXX
2
Left, Right
PSN00902-XXXXX
3
Left, Midlle, Right
A list of 8 keycode values can be mapped per key. If there is not keycode value defined for a key, this key is inacivated
So that the display of a secondary .ppk picture can be, a .ppk picture with the appropriate filename must be present on the file system:
For example:
F1.ppk
,
F2.ppk
,
F3.ppk
, .... If there no appropriate .ppk picture in the file system, the secondary .ppk picture can not be displayed.
For each of the 3 keys, several keycodes values can be mapped permitting to displayed consecutively several secondary .ppk picture each time this key is pressed.
Hexa value associated for each image name:
Value (Hexa)
Associated filename
1
F1.PPK
18