![background image](http://html1.mh-extra.com/html/qeedji/slate-series/slate-series_user-manual_3136891014.webp)
1.6
Pictureframe application
The SLATE106 device embeds the
Pictureframe
application which is able to display on the SLATE106 device screen, and in 4 grey levels, a full sceen .ppk picture
(propriety format) which can be updated:
through the
USB mass storage
(standalone),
by a hub
SMH300
, through the
WPAN1
and/or
by a key press (Left, Middle, Right).
A
Message Overlay
text can be updated by a mobile application (through the
WPAN2
).
Type
WPAN link dedicated to
BLE type
WPAN1
hub devices
BLE (Bluetooth Low Energy)
WPAN2
mobile devices
BLE over GATT profile
The SLATE106 device is designed to be most of time in sleep mode, to save power and increase the battery lifetime. It can be woken-up by 3 event types:
When an USB cable is connected or disconnected
When the internal timer has elapsed:
This internal timer is set automically when a new
active interval
is programmed
The default
active interval
is:
from 8.00 AM to 7.00 PM
5/7 days: Monday, Tuesday, Wednesday, Thursday, Friday
to change the configuration, refer to the chapter
When a
vibration
is detected:
The
vibration
detection can be activated or inactivated according to your needs.
When the
vibration
detection and the
touch key
are activated, the pictureframe can send the key pressed value (keycode) to the hub through the WPAN1
☛
Several features can be all activated at the same time
14