QED AutoPump Ultra 4.0, Operation Manual

Page: 47 / 49

44
AP Ultra Pump - Terms, Conditions, and Warranty
Five Year Warranty
This limited warranty is in lieu of and excludes all other representations made by advertisements, distributors, agents, or manufacturers
sales representatives, and all other warranties, both express and implied. There are no implied warranties of merchantability or of fitness
for a particular purpose for goods covered hereunder.
QED Environmental Systems warrants to the purchaser of its products that, subject to the limitations and conditions provided within the
Terms & Conditions of Sale, products, materials and/or workmanship shall reasonably conform to descriptions of the products and shall be
free of defects in material and workmanship.
All warranty durations are calculated from the original date of purchase—determined as beginning the date of shipment from QED facilities
and the date QED is notified of a warranty claim. This warranty shall be limited to the duration and conditions set forth below.
1. AP4 Ultra Pumps - Warranted for five (5) years: 100% material and 100% workmanship. This limited warranty coverage only applies to
long and short AP4 Ultra Pumps purchased with this warranty. There will be no warranty for application or material compatibility. The
materials used in pumps vary depending upon application and the customer is responsible for knowing the environment in which the pump
will be operating and working with QED to determine what materials of construction will be best for the application.
The warranty is valid when the following conditions exist: when the site has a pH between 2 and 12, has a salinity of 9,000ppm or less, is
between 40 and 180 degrees Fahrenheit (250 degrees F for high temperature pumps), is noncorrosive to the construction materials of the
pump, and is not abrasive. Typical commercial fuels are acceptable materials in free and dissolved phase. The pumps and accessories
must be operated within the specifications and limits given in the manual for the particular piece of equipment.
2. Hose, Tubing, Fittings, And Air Filtration Housings - Warranted for one (1) year: 100% material and 100% workmanship. There will
be no warranty for application or material compatibility. The materials used vary depending upon application and the customer is
responsible for knowing the environment in which the equipment will be operating and working with QED to determine what materials of
construction will be best for the application.
3. Wellheads, Well Caps, Flow Meters, Pneumatic Data Modules - Warranted for one (1) year: 100% material and 100% workmanship.
4. Precision Fine Tune Control Valves - Warranted for two (2) years: 100% material and 100% workmanship.
5. Parts and Repairs - Warranted for ninety (90) days: 100% material and 100% workmanship; when repairs are performed by QED or its
appointed agent; from date of repair or for the full term of the original warranty, whichever is longer. Separately sold parts are warranted for
ninety (90) days: 100% materials and 100% workmanship.
This warranty will be void in the event of unauthorized disassembly of component assemblies. Defects in any equipment that result from
abuse, operation in any manner outside the recommended procedures, use and applications other than for intended use or exposure
physical environments beyond the designated limits of materials and construction, will also void the warranty.
Chemical attack by liquids, gases or abrasive substances contacting equipment and accessories shall not be covered by this warranty. A
range of materials of construction is available from QED and it is the buyer's responsibility to select materials of construction to fit buyer's
application. QED will only warrant that the supplied materials will conform to published QED specifications and generally accepted
standards for that particular material.