13
Spindles and nuts on the Bottom
Spindles until the spindle heads
nest inside the Wall Cups.
Next using the Installation
Wrench, tighten the nuts on
the bottom spindles. Alternate
between the sides
until the red area
inside the AccuInstall
Indicator™ disappears.
This means the
bottom of the gate is
securely installed.
Step 9
While alternating between the sides,
turn the Hand Wheels until firm tension
is achieved. You can now cut off the
cable tie that has been holding the
gate together. Use the Hand Wheels
to adjust the tension so the distance
between the handle and the gate is
1/8" (3 mm). Use the Marking Tool
handle attached to the Level to
measure the gap.
Step 10
To open the Auto-Close door, pull back
on the Locking Latch and at the same
time lift gate to swing open. The handle
on the door has the At-A-Glance Lock
Indicator™ to indicate if the door is
locked or not. Green means that the
door is locked. Red indicates the door
is not locked and needs to be secured.
1/8 in.
3mm