Installation Instructions
X8800
14
Wake-Up On LAN (WOL)(optional)
Through the Wake-Up On LAN function, a wake event occurring from the network can
wake up the system. If this function is to be used, please be sure an ATX 12V power
supply and a LAN adapter which supports this function are used. Then connect this
header to the relevant connector on the LAN adapter, set “modem ring resume” as
Enabled in the “POWER MANAGEMENT SETUP” section of the CMOS SETUP. Save and
exit, then boot the operating system once to make sure this function takes effect.
Signal for waking up
WOL(optional)
+5V standby
GND
1
Debug LED (U2)(optional)
During the POST, the debug LED representing POST step will display code. If you need
the list of code description, please visit our web-site:www.qdigrp.com.
U2(optional)
