Manual for PlatiniX 2D series
55
Appendix
Because there exists some risk for the CPU chip or the mainboard to change the
CPU frequency , We suggest you read the manual carefully before installing QDI
StepEasyII .
When start QDI StepEasyII,
to avoid accident, we recommend you to close your
other program before run StepEasyII.
1. You can click on the 1MHz increase (1MHz decrease) or press shortcute key "+"("-" )to
set the wanted frequency, then click on the "GO" button to get the wanted frequency.
2. Also, you can click on the "Default" button , then click on the "GO" button to get the default
frequency.
3. StepEasyII considerately provides users to save his successful CPU tune frequency for
later use .If user wants to save the current frequency , he can clicks on the "Save" button to
realize it.
4. When click on the "Load" button , the saved CPU frequency is obtained immediately.
5. When click on the "Min" button, the utility will minimize to an icon in the right-bottom task tray.
Whenever user clicks the QSE(QDI StepEasyII abbr.) icon in the task tray, the utility will be
activated in the current window.
6. The real-time system information such as CPU temperature,CPU voltage and PCI clock will
automatic shown on the ineterface.
Note:
1. QDI StepEasyII can only support the QDI motherboard with the clock chip that sup
ports StepEasyII.
2. The performance of StepEasyII depends on the CPU, SDRAM, peripheral equipments
and the software running.
3. There exist some risks to change the CPU frequency for the CPU or motherboard.
StepEasyII can decrease the risks to minimum. But Legend QDI will not be responsible
for any damages caused.
4. If the system halts while running StepEasyII, please press the power button until the
system powers down .Restart your computer ,and the system will run in the normal
status.
5.When the system was woken up from S3 or S4 status,please click on the GObutton
to run at the selected frequency.
